Calibration block featuring three 0.1 mm wide notches and depths of 0.2 mm, 0.5 mm and 1 mm. The constituent material is supplied and machined in our workshops.
Calibration block used to calibrate rod-type eddy current probes.
Aviation-grade aluminium or other material.
The block is supplied with: A dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates, chemical analysis certificate for the block's constituent material.
- Engraved block
- Transport case
Diameter range: Ø3mm (H7) and up. Holes may also be machined straight, milled at 100°, or with a spherical mouth. Artificial defects: Rectangular notch, quadrant notch, vee-notch
Calibration block used to calibrate rotary EC probes.
Aviation-grade aluminium.
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Anodised protective finish
- Engraved block
- Transport case
Tubes with side-drilled holes, flat-bottomed holes, internal and external grooves, and notches. Plate simulation.
Calibration tubes used to calibrate EC probes.
Carbon steel, stainless steel or alloy (800, 600, 690).
The calibration tube is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Protective sleeve
- Etching
- Transport case
US calibration block, fully configurable to suit your requirements. The number of steps, step dimensions, number of artificial defects and defect dimensions can all be custom-specified. Flat-bottomed hole: Ø0.4mm or larger. Calibration notch: mouth width of 0.1mm or larger.
Ultrasound inspection equipment calibration.
All steel grades and all plastic grades.
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Sealed plugs for flat-bottomed holes
- Engraved block
- Transport case
US calibration block intended for thickness measurements, available in various configurations of step numbers and step heights.
Ultrasound equipment calibration
All grades
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Engraved block
- Transport case
US calibration block
Ultrasound equipment calibration.
Various grades in accordance with NF EN ISO2400 & NF EN ISO 7963, or custom grade: aluminium, duplex or superduplex alloy, stainless steel, etc.
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Engraved block
- Transport case
US calibration block featuring Ø1.5 or 3mm side-drilled holes and a 2x2mm groove
Ultrasound equipment calibration.
S355 steel
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Engraved block
- Transport case
US calibration block compliant with ASTM E317 fig.1. Dimensions 76.2mmx50.8mmx25.4mm with one Ø1.2mm side-drilled hole.
Calibration block used to evaluate the horizontal and vertical linearity of ultrasound equipment.
All grades.
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Surface treatment
- Engraved block
- Sealed plug for flat-bottomed hole
- Transport case
US calibration block featuring a Ø0.4mm, Ø0.8mm, Ø1.2mm, Ø1.6mm, Ø2mm or Ø3.2mm flat-bottomed hole. Ra ≤0.8µm (beam entry and exit). We can produce either the full set or custom products as required, in accordance with ASTM E127 requirements.
Ultrasound equipment calibration.
All grades.
The block is supplied with a dimensional inspection report stating all measured values, identifying the measuring instruments used, together with their measurement uncertainties and validity dates. A chemical analysis certificate for the block's constituent material is also included.
- Anodised protective finish
- Engraved block
- Sealed plug for flat-bottomed hole
- Transport case
